Steam Sterilizer

Product

Steam sterilizer Horizontal Cylindrical (fully automatic) WITH PID

Our horizontal Steam Sterilizer are widely used in various bulk laboratories/Hospital for their day to day studies on scale sterilization procedures where they give dryness of the sterilized medium a paramount importance and for that our sterilized media is prone to various micro-bacterial and viral infections. Having a specialization in customers’ requirements we have an expert team of making both standard and customized models.

Construction

Piping: Stainless steel 304/316 grade good quality seamless.

Fittings: Stainless steel 316 grade with B.S.P thread.

Stand: SS round pipe. Insulation: Rock wool slabs 50 mm thick.

Gasket: Silicon joint less.

Electrical load – 440 Volts, AC, 3 phase, Industrial water immersion type Heating elements, 6/9/12/18KW.

Boiler

Made of thick stainless steel 304/316 plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on a individual pressure gauge.

Safety lock for door

Every horizontal sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the Pressure locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant Neoprene Rubber gasket ensure steam tight fitting.

Pressure control

Electrically operated “PIEZOSTAT” (Pressure Control Device) is incorporated in all electrically operated sterilizers. It economizes power consumption and limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved and re-energies heaters when pressure falls down

TRIPLE SAFETY : The sterilizer is provided with triple safety.
1. By a pressure control switch which automatically limits the pressure to the required set valve.
2. Two spring loaded safety valves one each at chamber and boiler level.
3. A dead weight safety valve at chamber level.
A PLUG SCREEN prevents the discharge line from choking. The plug is easily removable for routing cleaning.
A powerful Ejector (for drying sterilized linen) circulates air through the chamber. The circulating air passes through a corrosion resistant metal wool filter.
A Digital is provided to show the chamber temperature.
AUTOMATIC VACUUM BREAKER is provided to break vacuum case of vacuum formation due to steam condensation.
Operating Temperature and pressure :–
1. Sterilizing Temp. : 121°C to 134°C
2. Sterilizing Pressure : 1.2 , 2.2 (15 psi to 30 psi)

Specification

Model	Inner dimension (inch)	Capacity (Litres)	Heater load
APS – SSHC – 75	16”x 24”	75	6 kW
APS – SSHC – 100	18” x 24”	100	6 kW
APS – SSHC – 125	16” x 36”	125	9 kW
APS – SSHC – 150	18” x 36”	150	12 kW
APS – SSHC – 200	20” x 36”	200	12 kW
APS – SSHC – 250	20” x 48”	250	12 kW
APS – SSHC – 350	24” x 48”	350	18 kW

Sterilization temp & pressure	Operating pressure
1.2 Kg/cm2 (15-18psi) at 121°C	From 10 psi to 20 psi

Note: Customized Solution Available On Request

Optional :

Vacuum Pump water immersion type ………………..….……
S.S. Loading carriage (1 no.) & S.S. Transfer trolley (2 Nos)…...….
For Double Door option ………………….………
Fully Automatic Autoclave PID controller based- It consists of advance controller which operates the electronic solenoid valve (in lieu of multiport valve) for steam injection inside the chamber, dry sterilization & steam exhaust...

Steam Sterilizer

Steam Sterilizer

Steam Sterilizer

Steam Sterilizer

Steam Sterilizer

Product